How to Use Eleaf GS Juni Tank - User Manual

How to Use GS Juni Tank ? 

Assembling: 

1. Unscrew the atomizer base from the GS Juni atomizer;
2. Drip a few drops of e-liquid directly into the atomizer head to make the coil inside fully saturated before first use;
3. Screw the primed atomizer head onto the atomizer base tightly;
4. Slowly fill the tank with e-liquid through either of the two side slots; (Note: please do not inject e-liquid into the center hole of the chimney; please do not overfill.)
5. Screw the atomizer base with the primed atomizer head onto the tank section tightly;
6. Adjust the airflow by turning the airflow control ring, and the atomizer is ready for use.

Warranty 

We are not responsible for any damages caused by human error. Legal warranty is applied.

Warnings 

1. Please keep out of reach of children. 2. This product is not recommended for use by young people, non-smokers, pregnant or breast-feeding women, or persons who are allergic/sensitive to nicotine.

Contra-indication 

1. Do not attempt to repair the product by yourself as damage or personal injury may occur. 2. Do not leave the product in high temperature or damp conditions, otherwise it may be damaged. 3. Do not use this product for other purposes except only for vaping and don’t swallow the e-liquid.

Possible Adverse Effects 

1. This product may be hazardous to health and contains nicotine which is addictive. 2. For people with adverse reaction after using this product, it is recommended to use the e-liquid with lower nicotine content or no nicotine.

How to Use Eleaf ELLO VATE Tank - User Manual

Eleaf ELLO VATE Assembling: 

1. Drip a few drops of e-liquid directly into the atomizer head to make the coil inside fully saturated before first use;

2. Screw the primed atomizer head onto the atomizer base tightly;

3. Put the glass tube on, and screw the top cap with mouthpiece on;

4. Slide the mouthpiece back to reveal the fill port, slowly fill e-liquid into the tank through the port, and then close the retractable top after filling. If the atomizer you purchased is the EU version, you need to first rotate counterclockwise the retractable top 180 degrees and then slide the mouthpiece back to reveal the fill port; (Note: please don’t overfill.)

5. The airflow can be adjusted by rotating the airflow control ring on the atomizer base; 6.Finally the atomizer is ready for use.

Warranty 

We are not responsible for any damages caused by human error. Legal warranty is applied.

Warnings 

1. Please keep out of reach of children. 2. This product is not recommended for use by young people, non-smokers, pregnant or breast-feeding women, or persons who are allergic/sensitive to nicotine.

Contra-indication 

1. Do not attempt to repair the product by yourself as damage or personal injury may occur. 2. Do not leave the product in high temperature or damp conditions, otherwise it may be damaged. 3. Do not use this product for other purposes except only for vaping and don’t swallow the e-liquid.


Possible Adverse Effects
1. This product may be hazardous to health and contains nicotine which is addictive.
2. For people with adverse reaction after using this product, it is recommended to use the e-liquid with lower nicotine content or no nicotine.

Up to 38% Off! Freemax Mesh Pro Subohm Tank - Dec. 2018

Something new? Mesh Pro Tank

If you want something new, then you won't forget the brand. Yes, it is Freemax. Freemax always brings us a lot of things that are bright, such as today's Mesh Pro Tank.

Freemax Mesh Pro Details

Mesh pro tank is stylish and sturdy with a colorful resin design. Its Drip tip, top lid and airflow ring are made of the same color resin and look vibrant. Compared to other brands, Freemax's products look more passionate and energetic. The 25mm diameter is very compatible with the commercially available vape mod. It brings us 5ml/6ml e-juice storage space. For vapers that like DL Vaping, the two Sub-ohm coils that Mesh Pro comes with will make you love it. Both of them have powerful atomization capabilities and are made of high-quality cotton.

Fashion has strength. It supports vape mod output power range: 40-110W. You can get more choices. Its two mesh coils are the world's first double mesh coil and triple mesh coil. As a new attempt, Freemax brings us surprises. If you like it too, you can go to Sourcemore to buy it. Buy now, and you will get 38% off. What are you waiting for?

Lost Vape Paranormal DNA 250C Instructions-User Manual

Lost Vape paranormal DNA 250C Introduction

The paranormal DNA 250C is the highly advanced edition of the Paranormal series, boosting in power with the integration of Evolv’s latest DNA 250c Color Chipset while maintaining the beloved chassis design and luxury materials.

The Paranormal DNA 250C utilizes Evolv’s most advanced DNA 250C board with down-throttled power, featuring an incredible 98% output efficiency rating, tremendous range from 1 to 200 watts, new puff replay feature to maintain preferred puffs, and couple with USB-The-Go feature for power sharing.

Continuing the legacy of developing luxurious and elegant design, the Paranormal DNA 250c is machined out of die-cast Zinc Alloy with stainless steel faceplate and buttons, genuine leaher battery door and customized side panels. The paranormal DNA 250C is able to reach 200watts with the implementation of dual 18650 batteries.

In order to satisfy and spare vaper’s needs and time, Lost Vape Paranormal DNA 250c provides preset profiles in Nikel (Ni200), Titanium(Ti) and Stainless Steel (SS) coil builds for ready to go.

Paranormal DNA 250C Standard Package

1 x Paranormal DNA 250C Device
1 x Paranormal Use Manual
1 x Customized Side Panels
1 x USB Connecting Cable
1 x USB On-The-Go Adaptor

This panel remover is used to take off the wood/carbon fiber panels.
Firstly, press the remover to the panel until it holds tight.
Secondly, pull it backward to take the panel out.

Note: Certain customized edition panels (Resin or Stab Wood etc.) are pre-installed which are not removable.

paranormal DNA 250C Mod Main Features

Power by Evolv Firmware Upgradable DNA 250C board
Dual 18650 Cells Setup for Long-lasting Power
Theme Designer Software/Customizable User Interface
Temperature Limit: 200℉-600℉
Output Power: 1watt – 200watts
Puff Replay
USB On-The-Go Charger
Body Material: Die Cast Zinc Alloy
Gun Metal and Stainless Steel Finishes
Electroplating Paintwork Firms Appearance
Included Customized Panels
Customized Leather Panel Wraps With Foam Cushion
Flip-Open Bottom Battery Sled for Battery Replacement
Spring Loaded Nickel Plated Brass Center Pin
Integrated 2A Onboard Charger
Dimensions: 91.5mm*55mm*27.5mm

 Evolv DNA 250C

The DNA 250C is a power regulated digital switch mode DC-DC converter for personal vaporizer. It features Evolv’s patented wattage control, Temperature Protection, Puff Replay, Preheat, full color TFT screen, On-The-Go USB, Reverse Polarity Protection, and onboard buttons, and a real-time clock. Evolv’s Escribe software and Theme Designer software can be used to fully customize all aspects of the interface and monitor the user experience. The DNA 250C runs on two lithium ion batteries, and features battery monitoring and an integrated 2A charger.


DNA 250C Mod Operating Range

Specifications

Absolute Limits

Output Power

The following graphs show the output power range of the DNA 250C as a function of the coil resistance.

Escribe

Escribe is a software package used to configure, monitor and modify the operation if your DNA 250C. It installs on a Windows PC and connects to your DNA 250C using the USB port. Escribe has a separate manual and tutorial which can be found on Evolv’s site.


http://www.evolvapor.com/
http://www.evolvapor.com/manuals/EScribeManual.pdf

Display of DNA 250C

To wake the device from power off state, tap the Fire button. To generate vapor, press the fire button. To change the wattage setting for more less vapor, click or hold the UP and Down buttons.

DNA 250C Vape Mod Error Messages

The DNA 250C will indicate a variety of error states.

Check Atomizer: The DNA does not detect an atomizer, the atomizer has shorted out, or the atomizer resistance is incorrect for the power setting.

Weak Battery: The battery is deeply discharged and needs to be charged, or is damaged. If this happens, the DNA 250C will not fire the atomizer. The Check Battery message will continue to display for a few seconds after attempting to fire the device. User should remove and replace the battery.

Shorted: The atomizer or writing are short circuited.

Ohms Too Low: The resistance of the atomizer coil is too low for the current wattage setting. If this happens, the DNA 250C will continue to fire, but will not be able to provide the desired wattage. The ohms too low message will continue to display for a few seconds after the end of puff.

Ohms Too High: The resistance of the atomizer coil is too high for the current wattage setting. If this happens, the DNA 250C will continue to fire, but will not able to provide the desired wattage. The ohms Too High message will continue to display for a few seconds after the end of puff.

Temperature Protection: The heating coil reaches the maximum allowed temperature during the puff. If this happens, the DNA 250C will continue to fire, but will able to provide the desired wattage.

Weak Battery: The battery needs to be charged, or higher amp rated battery needs to be used. If this happens, the DNA 250C will continue to fire the atomizer, but will not be able to provide the desired wattage. The Weak Battery massage will continue to display for a few seconds after the end of the puff.

Return To researched: The DNA has reached a limit configured by a researcher.

Too Hot: The DNA 250C has onboard temperature sensing. It will shut down and display this message if the internal board temperature becomes excessive.

Lost Vape Paranormal DNA Puff Replay

Puff replay is a new feature on the DNA 250C that allows the user to save and play back puffs. The use of a temperature sensitive material is required such as Nickel, Stainless Steel, Titanium, or other material that increases in resistance when heated. Puff Replay works in either temperature protection or wattage control modes and will also prevent dry hits when used with wattage control.

To use Puff Replay set the device to desired power level and operate it normally. Once a satisfying puff is achieved, activate Puff Replay to replay the last puff on all subsequent uses. Puff length is not a factor and the user will not be limited to the length of the previous puff. Disable Puff Replay to resume normal operation or find a new puff to save. If Puff Replay cannot be enabled the coil is not compatible.

Paranormal DNA 250C Mod Charging and USB On-The-Go

Charging the batteries
Internal Charging: The DNA 250C has a built-in 2A USB charger. It automatically detects the type of USB power supply it is connected to, so it can be plugged into the standard PC USB ports or higher power charger. The max charge current is based on the cell capacity as programmed in EScribe.

External charging (Recommend): Remove the batteries from device.
Follow charging instructions with using charger.

USB On-The-Go
The DNA 250C supports USB On-The-Go. An OTG adapter may be plugged into the Micro USB port on the device to charge any other device capable of charging via USB. Charging starts and stops automatically and OTG charging will not over-drain the DNA 250C

How to Use Eleaf iStick MELO Mod - Manual Instrution

Notice for Use Thank you for choosing Eleaf products! Please read this manual carefully before use so as to use correctly. If you require additional information or have questions about the product or its use, please consult your local agents, or visit our website at www.eleafworld.com. For more detailed instructions, please find tutorial video at: www.eleafworld.com/video/.

How to Use iStick MELO? 

Power on/off: 

5 quick clicks of the fire button to turn on/off the device. Keep holding the fire button to take a puff when the device is powered on.
Charging: simply plug the device in to a wall adapter or a computer via USB cable to charge.

Choose a vaping mode: 

when the device is powered on, press the fire button 3 times in quick succession, the device will display current vaping mode. Press the + or - button to switch among VW, Bypass, TC-Ni, TC-Ti, TC-SS, TCR-M1, TCR-M2, TCR-M3 modes and then press the fire button once or stay in the interface for about 10 seconds to confirm the vaping mode you chose.

Adjust wattage: 

in VW mode, the wattage can be adjusted by pressing +/- button. Keep holding +/- button to increase/decrease the wattage rapidly. In TC (Ni, Ti, SS, TCR-M1/M2/M3) mode, first press the fire button 4 times in quick succession and then press +/- button to adjust the wattage.

Adjust temperature: 

in TC-Ni/TC-Ti/TC-SS/TCR(M1,M2,M3) mode, simply press + button or - button to increase or decrease the temperature setting.

Set TCR value: 

in power-off state, keep pressing the fire button and the + button simultaneously, then you will enter the TCR (M1,M2,M3) set menu:

1. Press the fire button once repeatedly to choose among M1, M2 and M3 modes;
2. Press the + or - button to increase or decrease the TCR value according to the material of the coil you use;
3. Keep pressing the fire button or stay in the interface for about 10 seconds to confirm your setting. Adjustment buttons lock/unlock: keep pressing + button and - button simultaneously for two seconds when the device is powered on to lock and unlock the two adjustment buttons.

Turn display upside down: 

in power-off state, keep pressing + button and - button simultaneously for two seconds, the screen display will rotate 180 degrees.

Stealth on/off: 

in power-on state, keep pressing the fire button and - button simultaneously to switch between Stealth On and Stealth Off.

Turn ENU (Temperature Protection for Charging) on/off: 

in power-on state, press the fire button twice in quick succession repeatedly to turn ENU on/off. When the device is plugged in to charge in ENU-on state, if temperature of the device is lower than -5℃ or higher than 50℃, the screen will respectively display “BATTERY TOO COLD” or “BATTERY TOO HOT”. In both situations, the device won’t charge.

Warranty 

We are not responsible for any damages caused by human error. Legal warranty is applied.

Warnings 

1. Please keep out of reach of children.
2. This product is not recommended for use by young people, non-smokers, pregnant or breast-feeding women, or persons who are allergic/sensitive to nicotine.

Contra-indication 

1. Do not attempt to repair the product by yourself as damage or personal injury may occur.
2. Do not leave the product in high temperature or damp conditions, otherwise it may be damaged.
3. Do not use this product for other purposes except only for vaping and don’t swallow the e-liquid.

Possible Adverse Effects

1. This product may be hazardous to health and contains nicotine which is addictive. 2. For people with adverse reaction after using this product, it is recommended to use the e-liquid with lower nicotine content or no nicotine.

Best Vape Online Shop! All the Vape You Want is Here

Like every girl who likes beautiful clothes, every vaper feels that he still needs a Vape. With the growing development of the electronic cigarette industry, we have more choices. For example, Wismec launched the first Bluetooth speaker e-cigarette, the Wismec Active Kit. IJOY brought the first AI Vape, IJOY Avenger Kit and more.

But in fact, these are a small part. Geekvape, Vandy vape and other enthusiastic e-cigarette brands bring us a lot of products that make us feel new. Under the leadership of several major brands, the vaping experience has been upgraded again. Not only do they make the airflow system of the vape atomizer better, but the atomization effect is much improved.

If you are also an e-cigarette enthusiast, then there is a place you must know. I want to share with you is the Cloumix vape online shop. This is a paradise for e-cigarettes with a variety of electronic brands and different types of e-cigarettes. Cloumix is ​​one of the top three e-cigarette sellers in China. All the vape you want is here. Most importantly, it also has a super discount. The vape you wish to is sold at an ultra-low price. come on

So Easy to Use Smoant Naboo 225W Kit

I know that you also like Smoant Naboo, who would not love it? The device features a full-screen color display that delivers the same display experience as a smartphone. It allows us to upload photos to the device and freely set the desired background photo. You can choose your selfie, or a picture of you and your girlfriend, or any photo you like. No one will think that this is an electronic cigarette.

Personal and powerful. It is powered by two 18650 batteries and has a maximum output of 225W. It supports multiple output modes: VW (Min, Normal, Max) / VW Curves /Temp (Ni, Ti, SS) / TCR / TC Curves. Here you will get a VW Curves and TC Curves mode, allowing you to be more precise Control the desired output effect. In TCR mode, we will have more wire options.

As the engine of the Naboo Kit, the Naboo mesh tank brings an unexpected taste. It uses Japanese high-quality cotton to make e-juice have better conductivity and to avoid e-juice leakage. Using the bottom airflow adjustment system, we can better control the temperature, the amount of vapor generated and the resistance.

For those of us who use smartphones often, the Naboo Kit is not very difficult to use. By opening the virtual button lock on the side, we can adjust the desired output value by clicking the virtual button. Everything is so simple, then do you like it?

2018 Best Portable Pod Kit | Wismec Motiv 2 Vape Kit

The Pod kit is the hottest type of e-cigarette in 2018. Not only does beginner like it, even senior vapers like to go out with it. Wismec is a well-known e-cigarette brand that brings a lot of personalized products. Recently it launched a new pod kit, Motiv 2 Vape Kit. So how does this product perform?

What is it？

What is Motiv 2 Vape Kit? This is an AII-IN-ONE Pod Vape Kit that is friendly to every one. With a width of 34.4mm, a depth of 14.4mm and a height of 87.7mm, its compact size makes it easy for every user to carry. The Motiv 2 has a three-color led indicator that lets you know the battery status. Everything is simple on this product. I think you only need to add e-juice to complete all the operations, there is no fire button, there is no power adjustment, you only need to suck and use. Is this portable and easy to use e-cigarette what you want?

2018 Best Pod System AIO Vape Kit | Sigelei Compak A1 AIO Kit

The Pod System is the most popular e-cigarette product in 2018. Now, many vapers still use high power kits, but they all buy a Pod Kit for themselves. The Pod Kit brings more possibilities to e-cigarettes, making e-cigarettes truly portable. Today I want to introduce you to a very creative pod kit, Compak A1 AIO Kit.

What is Sigelei Compak A1 AIO Kit? This is an electronic cigarette that is powered by a 1100mAh battery and can store 2ml e-liquid. This product allows electronic cigarettes to be carried like a card. With the support of the 1100mAh battery, the Compak A1 will be well suited to our full-day vaping needs. This little baby hides the drip tip in the fuselage with a foldable design. When we want to use it, it can be popped up by the button at the top. Quite cool, and very good protection drip tip. The Kanthal A1 is the biggest highlight of this product. With the 1.5 ohm coil, this pod kit will bring us an immersive vaping experience. Now you can not only get a portable pod kit, but also get a super beautiful look. The Compak A1 comes in 6 optional colors, so pick the one you like the most.

2018 Best Modern Sense Kit | VOOPOO Mojo Vape Kit

Hello, everyone, I'm glad to meet with you again. So today I want to share with you is a portable Starter Kit from VOOPOO. VOOPOO has always been an e-cigarette brand with its own unique design style. It does not deliberately imitate any other brands, but it constantly launches innovative products. This is an important reason why I like it.

What is it?

What is VOOPOO Mojo Vape Kit? For me, it is not only a fashionable product, but also a very active electronic cigarette. This is a hot bloody item for you to see. It is available in 7 colors, black, bule, gray, orange, red, silver, yellow. Any color is full of passion, it is suitable for you. Mojo consists of two parts, UFORCE atomizer and Mojo Mod. A 2600mAh battery is hidden under this compact size, and a maximum output of 88W can be achieved. UFORCE uses a three-channel airflow system, so that the air can fully contact with the coil so that we can get a more complete taste and large cloud. If you also like street elements and sports style vaper, there is no reason to reject it.

Digiflavor Aura RDA,you must know

Digiflavor Aura RDA is big and charming. Digiflavor Aura RDA, more highlights. Digiflavor Aura RDA, I really like it. Digiflavor Aura RDA is worth a look.

The highlight of Digiflavor Aura RDA is:

1. Use two airflow channels, which can ensure the smooth flow of air and bring you a pleasant atomization experience.

2. Small size, light weight, easy to carry, you can go with Digiflavor Aura RDA anytime and anywhere, and every time you can experience the thrill of Digiflavor Aura RDA.

3. Nebulizer components can be assembled on their own, without having to worry about cleaning troubles.

4. The top fill design will not leak, you can easily fill the electronic liquid.

The above is a detailed introduction to the product, more details into the website view, looking forward to serving you.

Take this product to travel

I don't know if you have ever heard such a sentence. Life is more than just an eyelash, and there are poems and distances.

If you haven't had a good time in your life, then I think you should carry a backpack and a trip to go.
Of course, when you go out on a trip, you can't go empty. You should bring something and start with you. such as, you should change the taste of new e-cigarettes. You should try new e-cigarette devices because these subtle changes will help you to replace them.


Mood helps you to travel more easily. So why do I recommend SMOK Vape Pen 22 Light Editionto travel with you?


The reason I recommended SMOK Vape Pen 22 Light Edition is as follows:
1. Stylish appearance
2. Lighter weight, easy to carry
3. Use safety
4. Simple operation
5.cheap price


Then take this lightly loaded traveler and let you reap the poems and distances that belong to you.

IJOY SABER 100 KIT | Refresh Your Understanding of Pen Style Kit

The SABER 100 KIT can be acclaimed after it was introduced. This is not only a Vape Kit with a unique look, but also a king in the Pen Style Kit.

Impressive high power

The SABER 100 KIT (click to buy) has 29MM diameter and 97MM height. Here is a 20700 battery-powered device that can achieve 100W output. Yes, this is the most powerful output in Pen Style. This is why I say it will refresh your understanding of Pen Style.

Safer use experience

Its super output can well meet our demand for massive vapor, especially for players like Pen Style. We used to use mechanical vape batteries to get a more shocking experience. Now IJOY provides us with a safer experience.

Of course, this is also a good device for beginners. We have one product that can satisfy the beginner to advanced vaping needs. By the way, it also has output adjustment! This is a really good deal. right?

Let’s Join the Chinese Valentine’s Day Shopping Spree With VOOPOO

If you choose VOOPOO, it means that you choose unique. VOOPOO is an e-cigarette brand with its own design style that has been rare in recent years. Its design always gives you a simple but unique feeling.

For example, the TOO Kit for Oil Painting, the Mojo Kit for the young and the cute Panda Kit. Although these elements have appeared in many brands, VOOPOO can always be distinguished from other products in some details. This is why I love it.

Now VOOPOO has also joined the Chinese Valentine's Day shopping spree, so this time you will easily take any device you like. Yes, as long as you purchase at VOOPOO's official Vape Online Store (LINK), you will get a huge discount.

Yes, there is an important news. As long as your transaction amount reaches $52, you will get free shipping. As long as your purchase amount exceeds $100, you can get $20 deduction. If you purchase more than $30, you will receive a $5 deduction. Yes, the coupon code is in the photo below. Finally, we still hope that with this activity, you can also bravely express your love to your favorite people. Thanks for watching.

Let "One Minute" Tell You What Is the Difference Between SMOK Alien and AL85 Kit

SMOK is an e-cigarette brand that is very hot. Every product it brings is full of unique charm. For example, the Alient Kit and its baby version AL85 Kit. Then today's "One Minute" will tell you the difference between Alien Kit and AL85 Kit, and how to choose.

Both products are Vape Kits launched by the SMOK brand. The biggest difference between these two products is product positioning. Alien Kit is an advanced product, and AL85 Kit is a Starter Kit. Different product positioning brings different product configurations.

The maximum output of the 225W Alien is a dual 18650 powered device, and the maximum output 85W of the AL85 is powered by an 18650 battery. They have a similar appearance and are equipped with an OLED Screen.

Yes, they are paired with the Baby Beast TFV8 Baby Tank, which means they can share V8 coils. Actually, under the 60-70W output, it's hard to distinguish between the two products because their performance is Great.

A battery-powered AL85 Kit easily beats the Alien Kit for portability, but when we use the RBA Atomizer, the energy provided by Alien gives us a more impactful vaping experience and massive vapor.


I think if you are a vaper who wants to try vaping, AL85 Kit (Buy it)won't disappoint you. If you are a vapor chaser or advanced vaper, Alien Kit (Buy it)will give you a shocking vaping experience.

Where Can I Buy Aegis Legend 200W Kit ?

Since Geekvape launched the Aegis Legend Kit, vapers are very interested in this powerful vape kit.

Aegis Legend Kit is a product that allows you to use it in harsh environments. It passed the grade IP67 test in the laboratory. It is a vape kit that can be truly waterproof, dustproof and resistant to falls. The surface of the Aegis Kit is covered with protective materials such as silicone and soft leather.

Of course, Aegis Legend Kit also has excellent performance. It consists of two parts, Aegis Legend mod and Aero Mesh sub ohm tank. The Aegis Legend mod is powered by two 18650 batteries and supports switching between TCR/VPC/TC-NI/TC-SS/TC-TI/TC-TCR/BYPASS modes. The Aero Mesh sub ohm tank has a capacity of 5ml and is equipped with a 0.15 ohm super mesh coil, which gives you an extraordinary taste and plenty of vapor.

Now you can purchase Aegis Legend Kit from Cloumix Vape Online Store. Cloumix is officially authorized by Geekvape and all products sold are genuine. And promise fast shipping and 7-Day Money Back Guarantee. What are you hesitating?

Cloumix Vape Online Store Has Been Officially Authorized By Youde

Youde is an e-cigarette brand. As one of the industry leaders Youde focus on the development, production and sales of electronic cigarettes and other accessories. Youde is dedicated to creating electronic cigarettes of superior performance and great affordability.



Now that Cloumix has been officially authorized by Youde, you can purchase authentic electronic cigarettes from Youde on Cloumix Vape Online Store. Cloumix guarantee that the products they sell are all from Youde products, and there is no falsehood. You can also verify the authorization information through the link below the article.


Cloumix vape online store: https://www.cloumix.com/


Check the authenticity of the Cloumix here:
http://www.aspirecig.com/business-partners/china/
https://www.smoktech.com/global-partner

Coil Burnt Issue

If your coil start to have burnt taste within short using time, it may caused by these point:
1. Your vaping is too frequently
2. Vaping setting is improper
3. You didn't prime coil before vaping
4. E-juice is not enough in the core.
5. Defect coils

Suggestions & solutions:
1. Please try to inhale for several puffs without powering-on while using a new core or let the tank sits for about 15 mins.
2. Please prime the coil with low wattage for the first several puffs.

Eleaf MELO 4 Atomizer

 The MELO 4 comes with a MELO 4 atomizer, an EC2 0.3ohm head which is pre-installed, and an EC2 0.5ohm head. The thread type is 510 thread. There are six colors available: silver, black, white, greenery, blue, red.
 The MELO 4 atomizer features two new EC2 series coils: EC2 0.3ohm head and EC2 0.5ohm head, which can bring you pleasant vaping experience with enhanced flavor. The MELO 4 provides you with two options: D22 which e-liquid capacity is 2ml and the diameter is 22mm, D25 which e-liquid capacity is 4.5mland the diameter is 25mm. Features the convenient retractable top fill system, the MELO 4 can be filled easily. The dual air inlets with optional airflow, giving you great vaping experience. All the parts of the MELO 4 can be detached, you can clean it much more easily.