VOOPOO FINIC 20 Deal

VOOPOO FINIC 20 AIO is a pen-style kit. The following is its basic information.

Size                      20mm*117mm
Battery                   Built-in 1500mAh Battery
Power Range                      6-22W
Output Voltage 3.2-3.7V
Material                     Stainless Steel
Indicating Method           Tricolor light indication (Green/Blue/Red)
Capacity                     2ml
Thread                   510

The kit has many cellulars so as to enlarge the area of the air intake, in this way, to burn the juice quickly and evenly for providing smoother and richer flavor. It's safe to vape because of the patented child safety lock for security. What's more, the advanced GENE Chipset inside for constant voltage output.

In addition. FINIC 20 Kit works with YC-R1 0.6Ω coil and YC-R2 1.2Ω coil, which will bring optimal taste and clouds to the vapers.


Special Offer: $15.4 VOOPOO FINIC 20 AIO Kit

VOOPOO Navi Pod Kit/User Manual

VOOPOO Navi has high performance with an innovative triple airflow system and a powerful chip. Let's know it from basic information.

Speciation

Size 96 x 33 x 18mm Power Range 5 - 40W Capacity 3.8ml Resistance Range 0.1 - 3.0Ω Output Voltage 3.2 - 4.2V Battery 1500mAh (Built-in) Coils Supports all PnP coils Material Zinc Alloy + Resin / Zinc Alloy +PCTG Color Glaze, Mazarine, Ink, Lattice Red, Lattice Blue, Silk Purple, Carbon Fiber

Operations Steps of Navi Mod Pod Kit

1. Installation or Coll (illustration)

Pull out the atomizer and insert the coil from the bottom.

2. E-juice-refill operation

Pull out the pod;

pull out the rubber plug on the bottom and add a liquid through the slot. More than two-third is advised.

Press the plug back carefully and firmly.

Attention: For the first time using the coil, please place it for more than 5 minutes after filling coil.

3. Airflow adjusting (illustration)

Press the side adjustment button of the pod to achieve the proper inhalation experience.

Attention: Big air-flow channel should be adapted to high power output.

Operation instructions

1. On/off: Quickly press on the fire button five times.

2. Mode switching: Quickly press on fire button three times.

3. PUFF clear: Press the fire button and "-" button at the same time.

4. Clear the cumulative number of suction.

5. Enter the PUFF interface： Press the "+" and"-" button.

6. Exit the PUFF interface: Press and hold the fire button.

Note: PUFF 0000 Record the suction number of the recent 14 days in total. Press "+"and""button to check the suction number of a certain day.

7. Lock/unlock Press "+" and"-"button at the same time. The product can not be fired when locked or adjust power.

8. Enter clock interface: Press "+" and "-"button at the same time.

Clock interface, short press on fire button to change cursor, "+""-" button to settle time, press and hold fire button to save and exit

Security Protection - Overtime protection - Over-temperature protection - Output over-current protection -Overcharge protection - Low battery protection - Atomizer short-circuit protection - Max Power Protection

This is the end of the article.

The great deak of SMOK RPM80 Kit

RPM80 Kit is SMOK'S first pod with adjustable airflow! There are two types of pod: RPM80 RPM Pod With RPM Mesh Coil 0.4ohm and RPM80 RGC Pod With 0.17ohm Conical Mesh Coil to meet personal vaping demands better. What's more, both of them can hold 5ml e-juice.

As a sleek and hand-friendly mod pod kit, the RPM80 is powered by 3000mAh internal battery with 80W max output. It is equipped with a 0.96-inch screen to bring you the concise and informative user interface.

Price: $22.16 SMOK RPM80 Kit with Code: RPM80

VAPMOR VGO Kit Deal

VAPMOR VGO is an All-in-One Kit, and it can be equipped with a conventional tank and an open pod.

It is the first device that accommodates 2 different cartridges. You can freely switch the cartridges between nic salts (pod) and freebase e-liquid (tank) with ease. Besides, there is an adjustable airflow at the bottom of the tank for massive vapors.

Moreover, there are also child safety filling designs, multiple protections and passthrough charging design for this kit. Customizable power settings are available for this device, you can click the fire button 3 times to customize you power setting.

Hellvape GRIMM Coil Deal

Hellvape GRIMM Coil is specially designed for GRIMM Empty Pod.

There are two kinds of coils: H3-01 0.7ohm mesh coil and H3-02 1.2ohm regular coil. They have an airflow control ring on the coil base so you can obtain different flavor by adjusting the airflow.
In this way, the GRIMM Coil meets your individual demands better!

There are 3pcs in each pack.

Think Vape ZETA RBA Coil is the best choice for DIY fans!

ZETA AIO RBA Coil is designed for Think Vape ZETA AIO Kit.

It has simple post deck. If you're a DIY lover, the ZETA RBA Coil is the best choice for you!  Take it for your Think Vape ZETA AIO Kit or Think Vape ZETA AIO Pod!

Just 1pc in each pack