Battlestar Squonker Kit Brings You A Different Vaping Experience

With the spread of the pod kit, the Squonker mod also has its life. Also, it has an improvement on the bottle compatible with the whole box mod, ergonomic design, the airtightness and pressure comfort for juice bottle and chipset safety. The new Battlestar Squonker mod is such a mod on trying in this way. The Battlestar Squonker kit changes the squeeze construe to the PVC bottle with a pump button.

The items in the packing list

l Smoant Battlestar 200W TC Squonker Kit (without cells)

l Smoant Battlestar Squonker RDA

l Spare E-liquid Bottle

l Solid Pin

l Micro USB Cable

l User Manual

l Warranty Card

l Spare Parts Pack

The parameter for the Squonker kit

Battlestar Squonker

Size: 87.5 x 44.5 x 40.5mm
Battery: 2x 18650 batteries (not included)
Power Range: 1W-200W 
Screen: 0.96-inch OLED
Output modes: VW/VV/DVW(Wattage Curves)/Temp(Ni,Ti,SS)/TCR
Resistance Range: 0.05ohm-3.0ohm
Temperature Range: 200℉--600℉/100℃--300℃
Protection: Reverse/ Over-heating/ Low voltage/ Short-circuit / Over-time protections
Thread: 510 thread
Juice Capacity: 7ml

Smoant Battlestar Squonker RDA
Size: 24 x 22mm
Drip Tip: 810
Deck: Dual Coil Build Deck
Airflow: Single Angled Airflow

With the spread of the pod kit, the Squonker mod also has its life. Also, it has an improvement on the bottle compatible with the whole box mod, ergonomic design, the airtightness and pressure comfort for juice bottle and chipset safety. The new Battlestar Squonker mod is such a mod on trying in this way. The Battlestar Squonker kit changes the squeeze construe to the PVC bottle with a pump button.

The button on the top is golden is the button used for filling. You can press it directly to fill oil. When You use it for the first time or clean it for reuse, it needs press several times for filling. When the oil inserted to the line, you will have a feel on the squeeze resistance. I think they get the idea from the perfume bottle.

The battery door also acts as the door to lock the juice bottle. With the hard PVC bottle, it is much easier than the soft bottle for installation and solves the problem of leaking during the installation. The shape for the bottle and the box mod has a concavo-convex complement design decreased the size.

The juice bottle has a large juice filling hole, which is very easy for refilling with the common dropper on the market.  The connector for the top of the juice bottle and golden pressure has an Oring for anti-leaking. Till now, there is no leaking at all.

The Battlestar Squonker kit has excellent craftsmanship in details on the button sensitivity and seals gaps among all connector. When charging with the USD port, from the official site, it adopts the 2A charging technology. With the 5V/2A charging status, it needs only about 2.5 hours to get fully charged.

The operating system for the Battlestar has no difference with other box mod from Smoant with the larger screen with a clear displaying. You can get all details from the manual on how to turn on/off box mod and for modes setting.

The RDA deck and the airflow system has no much innovation on the structure. It is a practical RDA. With the 24mm diameter, it supports fancy coil and single coil.

There is dual-holes bypass design on the button for oil refilling. Theoretically, the design has an even bypass effect. It has to base on putting the tank horizontally. Inserting an A1/22G/3.0/6 single coil with the 40% air slot closed, you will get an obvious resistance with a nice flavor.

Conclusion

Comparing with the traditional BF Squonker mech kit or single battery regular kit, it has a convenient refilling system in use. It effectively solved the leaking from mistaken squeeze.  Changing the soft squeeze to the metal button, you can have control with it.

The Squonker box mod is very well built, and the RDA also has a great experience on inhaling and flavor. Even you order them separately, they would give you a great vaping experience.