How to Use Eleaf iStick MELO Mod - Manual Instrution
Notice for Use Thank you for choosing Eleaf products! Please read this manual carefully before use so as to use correctly. If you require additional information or have questions about the product or its use, please consult your local agents, or visit our website at www.eleafworld.com. For more detailed instructions, please find tutorial video at: www.eleafworld.com/video/.
Charging: simply plug the device in to a wall adapter or a computer via USB cable to charge.
1. Press the fire button once repeatedly to choose among M1, M2 and M3 modes;
2. Press the + or - button to increase or decrease the TCR value according to the material of the coil you use;
3. Keep pressing the fire button or stay in the interface for about 10 seconds to confirm your setting. Adjustment buttons lock/unlock: keep pressing + button and - button simultaneously for two seconds when the device is powered on to lock and unlock the two adjustment buttons.
in power-on state, press the fire button twice in quick succession repeatedly to turn ENU on/off. When the device is plugged in to charge in ENU-on state, if temperature of the device is lower than -5℃ or higher than 50℃, the screen will respectively display “BATTERY TOO COLD” or “BATTERY TOO HOT”. In both situations, the device won’t charge.
2. This product is not recommended for use by young people, non-smokers, pregnant or breast-feeding women, or persons who are allergic/sensitive to nicotine.
1. Do not attempt to repair the product by yourself as damage or personal injury may occur.
2. Do not leave the product in high temperature or damp conditions, otherwise it may be damaged.
3. Do not use this product for other purposes except only for vaping and don’t swallow the e-liquid.
1. This product may be hazardous to health and contains nicotine which is addictive. 2. For people with adverse reaction after using this product, it is recommended to use the e-liquid with lower nicotine content or no nicotine.
How to Use iStick MELO?
Power on/off:
5 quick clicks of the fire button to turn on/off the device. Keep holding the fire button to take a puff when the device is powered on.Charging: simply plug the device in to a wall adapter or a computer via USB cable to charge.
Choose a vaping mode:
when the device is powered on, press the fire button 3 times in quick succession, the device will display current vaping mode. Press the + or - button to switch among VW, Bypass, TC-Ni, TC-Ti, TC-SS, TCR-M1, TCR-M2, TCR-M3 modes and then press the fire button once or stay in the interface for about 10 seconds to confirm the vaping mode you chose.Adjust wattage:
in VW mode, the wattage can be adjusted by pressing +/- button. Keep holding +/- button to increase/decrease the wattage rapidly. In TC (Ni, Ti, SS, TCR-M1/M2/M3) mode, first press the fire button 4 times in quick succession and then press +/- button to adjust the wattage.Adjust temperature:
in TC-Ni/TC-Ti/TC-SS/TCR(M1,M2,M3) mode, simply press + button or - button to increase or decrease the temperature setting.Set TCR value:
in power-off state, keep pressing the fire button and the + button simultaneously, then you will enter the TCR (M1,M2,M3) set menu:1. Press the fire button once repeatedly to choose among M1, M2 and M3 modes;
2. Press the + or - button to increase or decrease the TCR value according to the material of the coil you use;
3. Keep pressing the fire button or stay in the interface for about 10 seconds to confirm your setting. Adjustment buttons lock/unlock: keep pressing + button and - button simultaneously for two seconds when the device is powered on to lock and unlock the two adjustment buttons.
Turn display upside down:
in power-off state, keep pressing + button and - button simultaneously for two seconds, the screen display will rotate 180 degrees.Stealth on/off:
in power-on state, keep pressing the fire button and - button simultaneously to switch between Stealth On and Stealth Off.
Turn ENU (Temperature Protection for Charging) on/off:
in power-on state, press the fire button twice in quick succession repeatedly to turn ENU on/off. When the device is plugged in to charge in ENU-on state, if temperature of the device is lower than -5℃ or higher than 50℃, the screen will respectively display “BATTERY TOO COLD” or “BATTERY TOO HOT”. In both situations, the device won’t charge.Warranty
We are not responsible for any damages caused by human error. Legal warranty is applied.Warnings
1. Please keep out of reach of children.2. This product is not recommended for use by young people, non-smokers, pregnant or breast-feeding women, or persons who are allergic/sensitive to nicotine.
Contra-indication
1. Do not attempt to repair the product by yourself as damage or personal injury may occur.
2. Do not leave the product in high temperature or damp conditions, otherwise it may be damaged.
3. Do not use this product for other purposes except only for vaping and don’t swallow the e-liquid.
Possible Adverse Effects
1. This product may be hazardous to health and contains nicotine which is addictive. 2. For people with adverse reaction after using this product, it is recommended to use the e-liquid with lower nicotine content or no nicotine.
No comments